(Please keep in mind that this is only a partial solution as it does not change the language of the menu options. Right click it up and press update > automatically search online for update. Place the NCSEXPER.TXT file into your 'NCSEXPERCFGDAT' (It will ask if you want to replace it, click yes. If it isn't recognizing it you'll usually see the cable labeled DCAN with a yellow triangle on it somewhere on the device manager list. Neither of these work for my E90 even though INPA works fine. Am I missing something here The only options I get when I say load profile are Code Control Unit - allow ZCS reading and Expertmode. If you don't see anything under Com & Ports then that means your issue isn't related to Com port or any type of settings of ediabas, it's because your cable is faulty or your laptop isn't recognizing it. Ive downloaded several different versions of NCS Expert from different sites and none of them have the profiles. You can change it to whatever port matches your cable in device manager > com & ports > right click your cable and go to properties > advanced > make sure latency is 1 and com port matches whatever is in Obd file. do you have the exact name of the file and what you edited or could you send screenshots. Ive just gone through the obd config file but its still not registering my cable.

If you go to C drive > Ediabas > Bin > open Obd config file and you can manually change the com port to whatever you want as long as it matches the device manager com port setting. About the Position: This is a Security Specialist, GS-0080-9 position with the U.S.

Ncs expert new profiles